Baofeng UV-28 Plus handleiding
Handleiding
Je bekijkt pagina 27 van 31
2 RX Frequency
View the current channel Receiver frequency, allow to change the current
frequency. Input the RX frequency by keypad, click the Menu key to save
3 TX Frequency
View the current channel Transmitter frequency, allow to change the current
frequency. Input the TX frequency by keypad, click the Menu key to save
4 Trans Power
High
Selects between HIGH transmitter power when in VFO/Frequency mode.
Middle
Selects between Middle transmitter power when in VFO/Frequency mode.
Low
Selects between LOW transmitter power when in VFO/Frequency mode.
5 Bandwidth
Wide
Wideband (25 kHz bandwidth)
Narrow
narrowband (12.5 kHz bandwidth)
6 RX CTCSS OFF;67-254.1
Mutes the speaker of the transceiver in the absence of a specific and
continuous sub-audible signal. If the station you are listening to does not
transmit this specific and continuous signal, you will not hear anything.
7 RX DCS OFF;023N-754I
Mutes the speaker of the transceiver in the absence of a specific low-level
digital signal. If the station you are listening to does not transmit this specific
signal, you will not hear anything.
8 TX CTCSS OFF;67-254
Transmits a specific and continuous sub audible signal to unlock the squelch
of a distant receiver (usually a repeater).
9 TX DCS OFF;023N-754I
Transmits a specific low-level digital signal to unlock the squelch of a distant
receiver (usually a repeater).
10 Encryption
OFF
Disable encrypted mode, your conversations are not private.
ON
Activating encryption mode ensures the privacy of your conversations.
To use the Encryption function, the other part of the radio must also have
Encryption activated and must be tuned on the same DCS code.
11 Signaling 1-20
Selects 1 of 20 DTMF codes. The DTMF codes are programmed with software
and are up to 3 digits each.
12 CH-MDF
NAME
MR/Channel mode is displayed in NAME format. Note: NAME allows CPS
program or edit in the channel nameMunu 1.
FREQ
MR/Channel mode is displayed in frequency format.
CH
MR/Channel mode is displayed in CH format.
13 SP-Mute
QT
when radios is set in this mode, the monitor feature is activated only when
the radio receives the correct CTCSS/DCS.
QT+DTMF
with this option, the monitor is activated when the radio receives the correct
CTCSS/DCS and the correct DTMF code.
14
SCAN ADD
OFF
Forbid the current channel to join the scan group.
Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-28 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3629 MB |
