Baofeng UV-28 Plus handleiding
Handleiding
Je bekijkt pagina 26 van 31
20 DTMF-ST
OFF
No DTMF Side Tones are heard
DT-ST
Side Tones are heard only from manually keyed DTMF codes
ANI-ST
Side Tones are heard only from automatically keyed DTMF codes
DT+ANI
All DTMF Side Tones are heard
21 PTT-ID
OFF
No ID is sent.
BOT
The selected S-CODE is sent at the beginning
EOT
The selected S-CODE is sent at the ending
BOTH
The selected S-CODE is sent at the beginning and ending
22
PTT-DLY
100-3000ms
Signal code sending delay. PTT-ID Delay (milliseconds)
23 ALERT
1000Hz
The following configurations will transmit accordingly:
PTT + SK2= Transmits 1000Hz Tone Burst
1450Hz
PTT + SK2= Transmits 1450Hz Tone Burst
1750Hz PTT + SK2= Transmits 1750Hz Tone Burst
2100Hz
PTT + SK2= Transmits 2100Hz Tone Burst
24 TAIL
OFF
Disable Squelch Tail Elimination.
ON
Enable Squelch tail elimination. to prevent any squelch tails from being heard.
25 Press SK2
FM Radio
FM radio on/off
Scan Scan on/off
Search
Search on/off
VOX
VOX on/off
26 Reset
VFO
Reset the radio's VFO menu to factory defaults (no reset for bank, scan
settings)
ALL
Resets the radio to factory defaults, with some exceptions.
5 GPS
1 GPS On/Off
OFF
Turn off the position system, long press the MENU key is ineffective
ON
Turn on the position system, press and hold the MENU key to enter GPS
mode
2
Time Zone
-12 to 0 to + 12
Set the time zone of the region
3 GPS Mode
GPS
BDS
GPS+BDS
6
Program
Channel
1 CH.NAME Channel 1
View channel name, allows to rename the current channel. Press the
key to switch the input method, allowing the input of letters, numbers and
symbols.
Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-28 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3629 MB |
