Baofeng UV-28 Plus handleiding

Niet gecategoriseerd

Baofeng

31 pagina's

PDF beschikbaar

Handleiding

1. After the GPS position of the radios is successful, press the key to switch to the My Place information interface.

2. Press the / key to select the pre programmed member sequence (01-20), and display the sequence and call name on the first line. Select member

sequences that are not marked as "native".

3. Press the [PTT] key to initiate a position request command to the target member.

-Disable transmission during waiting for reception.

-If the other party receives your request, they will reply with your location information.

-The red center point represents your position, the flashing red dot within the circle represents the position of the other side, and the bottom left corner is the

reference distance between two radios.

7. MAIN MENU FUNCTIONS

The menu function allows you to perform operations such as selecting BANKS, SCAN, Bluetooth, GNSS, Radio Settings, Program Channels, Recording and

Radio Information.

7.1 Basic use

Use menus with arrow keys

(1) Press the

key to enter the main menu.

(2) Use the  or  keys to navigate between menu items.

(3) After finding the desired next menu item, press the

key again to select the menu item.

(4) Use the  or  keys to navigate between the next menu items.

(5) After finding the desired next menu item, press the

key again to select the menu item.

(6) Use the  or  keys to select the desired parameter.

(7) When you have selected the parameter to be set for a given menu item;

(8) To confirm your selection, press

and it will save your setting and bring you back to the main menu.

(9) To cancel your changes, press

and it will reset that menu item and bring you out of the menu entirely.

(10) To exit out of the menu at any time, press the PTT key.

7.2 Using short-cuts

As you may have noticed if you looked at Appendix C, Menu definitions, every menu item has a numerical value associated with it. These numbers can be

used for direct access of any given menu item.

Using the menu with short-cuts

(1) Press the

key to enter the menu.

(2) Use the numerical keypad to enter the number of the menu item.

(3) To enter the menu item, press

the key.

(4) For entering the desired parameter you have two options:

a) Use the arrow keys as we did in the previous section; or

b) Use the numerical keypad to enter the numerical short-cut code.

Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.