Baofeng UV-28 Plus handleiding

Niet gecategoriseerd

Baofeng

31 pagina's

PDF beschikbaar

Handleiding

Talkaround has been activated, off grid at the central turntable. The transmission frequency is equal to the receive frequency

The confidential calling feature is activated

Narrowband enabled

4.3 Main keypad controls

• key: MENU key, It is used for activating the MENU, choose each MENU selection and confirm the parameter.

After activation the GPS position function, press and hold the

key to quickly enter GPS mode.

•Ÿkey: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this control to move the scanning

upwards.

•źkey: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN mode, press this control to move the

scanning downwards.

•

Key: EXIT key, press to exit the Menu and functions.

Press and hold

key to activate the frequency sweep function. Realize fast group.

• Numeric keypad

With these keys you can input the information or your selections on the radio.

•

Key

When there is a frequency difference between reception and transmission, press the

key can activate the frequency reversal and talkaround

functions.

The radios features a keypad lock that locks out all keys except for the three side keys.

To enable or disable the keypad lock, press and hold the

key for about two seconds.

• 0

key

Press and hold the [0

] key to activate the NoAA weather forecast reception function

•

key

When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as an active station is found,

regardless of scanner resume method.

To enable the scanner, press and hold the

key for about two seconds.

5.BASIC OPERATIONS

5.1 Power on the radio

• Turning the unit on

To turn the unit on, simply rotate the Volume/Power knob clockwise until you hear a "click". If your radio powers on correctly there should be an audible double

beep after about one second and the display will show a message or flash the LCD depending on settings for about one second. Then it will display a

frequency or channel. If the Voice prompt is enabled, the voice will announce "frequency mode" or "channel mode".

Bekijk gratis de handleiding van Baofeng UV-28 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.