Baofeng K6 handleiding
Handleiding
Je bekijkt pagina 17 van 38
In freque ncy (VFO) mode you can navigate up and down the ba nd by using the
5.5 Frequency (VFO) Mode
/ keys. Each press will increment or decrement your
freque ncy according to the frequency step you've set yo ur tra nsceiver to.
You can also input frequencies directly on your numeric keypad with kilohertz accuracy.
The following example assumes t he use of a 12.5 kHz frequency step.
Example. Entering the frequency 436.61250 MHz on display A
(1) In standby mode, press the [V/M] key to switch to the frequency (VFO ) mode.
(2) Enter [4][3][6][6][1][2][5] [0] on the numeric keypad.
WARNIN G!
Just because you can program in a channel does not mean you're automatically authorized to use that frequency. Transmitting on frequencies
you're not authorized to operate on is illegal, and in most jurisdictions a serious offence. However, it is legal in most jurisdictions to listen.
Contact your local regulatory body for further information on what laws, rules and regulations apply to your area.
The scanning and receive function of the aviation frequency band (AM108-136MHz) and the police frequency band (350-390M Hz) is limited
to use in VFO mode and allows manual input of these frequencies. Prohibit use in channel mode.
In Channel (MR) mode you can navigate up a nd
5.6 Channel (MR) Mode and Channel Selection
There are two modes of operation: Frequency (VFO) mode , and Channel or Memory (MR) mode.
For everyday use, C hannel (MR) mode is going to be a whole lot more practical than Frequency (VFO) mode. However, Freque ncy (VFO) mode is
very handy for experimentation o ut in the field. Frequency (VFO) mode is also used for programming cha nnels into memory.
down the channel by using the
/
keys or the encoder.
• Operation 1
Ultimately which mode you end up using will depend entirely on yo ur use case.
Press [V/M] key to switch the radio between VFO and Channel mo de, select C hannel mode.
: Press the
/ navigation key to select the channel.
-14-
• Operation 2: Input the channel number using the keypad. For example, to switch to channel 12, enter [0][1][2]. The radio will then switch to
channel 12.
When the voice prompt function is enabled, the corresponding channel will be broadcast by voice.
Bekijk gratis de handleiding van Baofeng K6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | K6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4952 MB |
