Baofeng GM-15 PRO handleiding
Handleiding
Je bekijkt pagina 24 van 50
20
information, bandwidth, ANI/ PTT-ID settings and a six character alphanumeric identifier or channel name
1
.
Frequency Mode vs. Channel Mode
In standby mode, press and hold the key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO) : Used for a temporary frequency assignment, such as a test frequency or quick field programming if
permitted.
Channel Mode (MR) : Used for selecting preprogrammed channels.
Ex 1. Programming a Scan Channel with CTCSS Tone
EXAMPLE New memory in Channel 31:
RX = 432.55000 MHz
TX CTCSS tone 123.0
A. Press the [ ] button to switch between menus.
B. Press and hold the key to set the radio to VFO mode, and the VFO icon is displayed on the right.
C. [2][8] [3] [1] [ ] Deletes Prior Data in channel (Ex. 31)
D. [1][0] 123.0 [ ] Selects desired RX encode tone
E. Enter RX frequency (Ex. 43255000)
F. [2][7] [3][1] Enter the desired channel (Ex 31)
-->>[ ] RX has been added
G. Press and hold the key to return to the MR mode and the channel number will reappear.
Ex 2. Channel memory for scanning frequency
EXAMPLE New memory in Channel 31:
Scans frequency ranger 430-435MHz
RX = 432.55000 MHz
RX DCS D023N
Bekijk gratis de handleiding van Baofeng GM-15 PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | GM-15 PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5753 MB |
