Backyard Pro 554PL2030 handleiding
Handleiding
Je bekijkt pagina 18 van 27
shopbackyardpro.com
18 |Operation Instructions
PREPARATION FOR USE & LIGHTING INSTRUCTIONS
LIGHTING INSTRUCTIONS
BEFORE INITIAL USE
1. With the grill properly setup and located for operation, ensure control knob is in the OFF position.
2. Plug the power cord into a 120V grounded electrical outlet. (Refer to SETUP PROCEDURE on page 15 for more information.)
3. Open the grill lid. Ensure all components are properly installed and ready for use.
4. Ensure the hopper does not contain any foreign objects and is properly filled with barbecue wood pellets.
5. Ensure the auger tube of the hopper is filled with pellets. If not, go back to SETUP PROCEDURE to fill pellets into auger tube.
6. Turn the control knob to SMOKE. Listen for operation of fan and auger motors. Within 5 minutes, smoke should become visible. If
smoke does not initially appear, turn OFF power and wait 5 minutes before attempting to relight. (Refer to the TROUBLESHOOTING
section of this manual for more information.)
7. Ensure the grill is lit, keep the grill lid open for 5 minutes to complete the lighting procedure.
8. Select the desired cooking temperature and smoking preset. (Refer to COOKING INSTRUCTIONS for more operating information.)
NOTE: We recommend setting the control knob to HIGH for 10-15 minutes to preheat the grill. If the grill temperature is higher than
your selected setting temperature, open grill lid to cool until the temperature is close to the selected setting temperature.
1. Follow SETUP PROCEDURE to ensure the grill is safe for operation.
2. Follow LIGHTING INSTRUCTIONS to start the grill.
3. Set the temperature to 250°F and allow to operate for 2 hours.
4. Increase the temperature to 400°F and allow to operate for an additional hour.
5. Turn grill OFF and allow to fully cool.
6. Your grill is now cured and ready for use.
Before initial use, it is recommended to cure the grill to remove manufacturing oils or residue and minimise smoke odors or unnatural
flavors from being added to food.
• The pellet hopper must be properly setup with pellets in the auger tube PRIOR to lighting the grill.
• NEVER add or use wood chips or particles in the hopper. ONLY use barbecue grade pellets.
• Use of an extension cord is NOT recommended. But if necessary, use only a maximum length of 25' with a 3 prong grounding
plug rated for power of the equipment and approved for outdoor use with a W-A marking.
• DO NOT break the ground end off the cord or use a non-grounded outlet or extension cord.
• NEVER immerse cord, plugs, or electric elements in water or any liquid.
• NEVER operate the grill with a damaged power cord or plug, or after the grill has malfunctioned or been damaged in any manner.
• Keep any power cords away from heated surfaces.
CAUTION!
Bekijk gratis de handleiding van Backyard Pro 554PL2030, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Backyard Pro |
| Model | 554PL2030 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4775 MB |
