Backyard Pro 554PL2030 handleiding
Handleiding
Je bekijkt pagina 17 van 27
shopbackyardpro.com
Operation Instructions | 17
• PLACE THE GRILL OUTDOORS ON A HARD, LEVEL, NON-COMBUSTIBLE SURFACE AWAY FROM ROOF, OVERHANG, OR ANY
COMBUSTIBLE MATERIAL.
• NEVER USE ON WOODEN OR OTHER SURFACES THAT COULD BURN.
• PLACE THE GRILL AWAY FROM OPEN WINDOWS OR DOORS TO PREVENT SMOKE FROM ENTERING ENCLOSED SPACES.
• IN WINDY OR RAINY WEATHER, PLACE THE GRILL IN AN OUTDOOR AREA THAT IS PROTECTED FROM THE WIND AND RAIN.
• READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR GRILL.
• NEVER add pellets to a hot fire pot by hand. You could be seriously burned. If the pellets run out or the fire goes out, wait until
the grill cools down, then follow the SETUP PROCEDURE to restart.
• NEVER put water in the fire pot as this could cause the auger to jam.
• NEVER use water to extinguish flare-ups. Close the lid and turn off the grill and wait for the fire to extinguish itself.
• NEVER use any flammable liquids, such as gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar
liquids to start or freshen-up the fire! Keep all such liquids well away from the grill while it is in use.
• NEVER inspect or perform maintenance on a hot grill. Allow to properly cool before inspecting and cleaning your grill.
• Follow this procedure before first use and after every other use, or after a long cook time.
• This should be performed ONLY when the grill is cool, before being used.
• During shipping or moving around your deck, some components may shift from position.
A complete visual inspection of the grill assembly is required after moving.
1. Open the grill lid. Remove the warming racks and cooking grates.
2. Remove the grease tray and clean off any excess food drippings or grease build-up.
3. Inspect and clean the grease drain. Ensure the drain tube is not blocked.
4. Remove the flame baffle. Inspect the bottom of grill body and clean out pellet ash. Also inspect and clean out fire pot. Ensure there
are no foreign objects in the fire pot and that the ignitor is clean and clear of debris.
5. Open the hopper lid and check for any foreign objects. Fill the hopper with your choice of wood pellet fuel made for barbecue and close
the hopper lid.
6. Ensure the control knob is in the OFF position.
7. Turn the control knob to HIGH.
8. Observe the auger turning as pellets fill the tube. Once pellets reach the fire pot, turn the grill OFF.
DO NOT reach into the fire pot.
9. Re-install the flame tamer, grease tray, cooking grates, and warming racks. Close the grill lid.
10. The grill is now ready for use. Follow the LIGHTING INSTRUCTIONS to continue.
PREPARATION FOR USE & LIGHTING INSTRUCTIONS
CAUTION!
WARNING!
SETUP PROCEDURE
Bekijk gratis de handleiding van Backyard Pro 554PL2030, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Backyard Pro |
| Model | 554PL2030 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4775 MB |
