Baby Trend Tango 3 handleiding
Handleiding
Je bekijkt pagina 25 van 34
47
48
7.0 INSTALLATION 7.0 INSTALLATION
7.3 Installation of the Base using LATCH
Lower Anchors and Tethers for Children (LATCH) System
is designed to make installation of child safety seats easier
by requiring child safety seats to be installed without using the
vehicle’s seat belt system. By September 1, 2002, two rear seating
positions of all cars, mini vans and light trucks will come equipped
with lower child safety seat anchor points located between a
vehicle’s seat cushion and seat back. Also by September 1, 2002,
all child safety seats will have two attachments which will connect
to the vehicle’s lower anchor points. Together, the lower anchors
and upper tethers make up the LATCH system. Rear-facing infant
seats do not make use of the upper tether.
1. Remove any toy or other objects attached to carry handle before
installing car seat in vehicle.
2. Locate a LATCH seating position as identied in your vehicle
owner’s manual. Some LATCH seating positions may require
deploying of anchors, or installation of guides.
3. Remove the Safety Seat from the base by squeezing the base
release handle located under the center of the head end of the
Safety Seat and lifting upward on the Safety Seat (Fig. 24-1).
4. Remove the
LATCH
connectors from
their storage position inside the base
(Fig. 48-1). Place the Base in the rear-
facing position in a forward facing vehicle
seat as shown in (Fig. 49-1). The Child
must face the rear of the vehicle and
Safety Seat must be placed in a vehicle
seat that faces forward.
5. Locate the
LATCH
anchors in the vehicle
seat (Fig. 48-2). Once located, snap the
Safety Seat
LATCH
connectors onto the
steel rod. Listen for the click and check
that both connectors are rmly attached to
the anchor rods by pulling outward on the
connectors (Fig. 49-2).
6. Proper installation of the Base requires
that the
LATCH
webbing be very tight.
To tighten the webbing, push down hard
Fig. 48-1
Fig. 48-2
Latch Anchor
Lap/Shoulder Belt
Lap/Shoulder Belt
Recommended
Lap/Shoulder Belt
Alternate
Lap Belt only
Lap belt only LATCH Lower Anchor
LATCH
On Base Vehicle Belt
Ally 35 Approved Installations
Off Base Vehicle Belt
Bekijk gratis de handleiding van Baby Trend Tango 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Trend |
| Model | Tango 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4112 MB |
