Baby Trend Tango 3 handleiding
Handleiding
Je bekijkt pagina 24 van 34
45
46
7.0 INSTALLATION 7.0 INSTALLATION
10. A lap/shoulder combination seat belt with a
buckle that can slide freely along the seat
belt may require the use of a locking clip
(Fig. 45-2). Check your vehicle’s owner’s
manual to see if the vehicle manufacturer
has provided an alternate manner, such
as a locking retractor in which to prevent
movement of the lap portion of the seat
belt.
• To install the locking clip, tighten the
buckled seat belt by pulling upward on
the shoulder portion of the seat belt
while pushing down hard on the Safety
Seat or Base.
• While maintaining downward pressure
on the Safety Seat or Base, squeeze
the shoulder belt and lap belt together
just above the buckle to prevent from
moving. Unbuckle the seat belt being
careful to prevent movement of the
buckle.
• Secure the shoulder belt to the lap belt
by installing the locking clip 1/2 inch
from the buckle as shown in Fig. 45-3.
• Re-buckle the seat belt and check that
the seat belt is very tight around the
Safety Seat or Base. Pull on the lap belt
to ensure that the locking clip is locking
the lap belt and it remains very tight.
Fig. 45-1
Fig. 45-2
Fig. 45-3
11. If you are using the Base, check that
nothing is on top of the base, or anything
that will interfere with the proper latching
of the Safety Seat to the Base. Place
the Safety Seat onto the Base and
push down until the Safety Seat latches
securely to the Base and you hear a
click. Pull upward on the Safety Seat to
check that the Safety Seat is securely
latched onto the base (Fig. 46-1).
If the Safety Seat does not securely latch onto the Base, the
Safety Seat will NOT provide Protection for your child. DO NOT
use the Safety Seat with the Base if it does not securely latch into
place. Please call Baby Trend at 1-800-328-7363 for assistance.
12. Adjust handle to the Rebound position.
The Carry and Non-Rocking are also accepted in-vehicle
handle use positions but Rebound is recommended.
13. Car Seat Removal from Base or Stroller
Fig. 46-1
Fig. 46-2
(1) Rotate Carry Handle to
the carry position. (2) Locate
the red release handle behind
the head end of the car
seat. Squeeze the handle to
engage the base release
(Fig. 46-2). (3) Lift Car Seat
by the Carry Handle
and Base Release
handle simultaneously.
Do Not lift by front of car seat
(1)
(2)
(3)
(3)
Bekijk gratis de handleiding van Baby Trend Tango 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Trend |
| Model | Tango 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4112 MB |
