Baby Lock Splendor BLSP8 handleiding
Handleiding
Je bekijkt pagina 58 van 82
Turning Outside Corner – Overlock
Turning Inside Corner – Overlock
1. Stitch along one edge until you reach the corner. Take one
stitch off the edge of the fabric (fig. A). (As you approach the
edge, you may want to stop and manually turn the handwheel
towards you.)
2. Raise the presser foot. Bring the needle(s) to the highest posi
-
tion, and pull a little slack in the needle threads.
3. Clear the stitch fingers, and rotate the fabric to reposition the
needle(s) at the previous row of stitching (fig. B). Gently pull
up on all the threads to remove any slack. Lower the presser
foot and resume stitching.
NOTE: A loose thread loop at the corner is caused by too much
slack in the needle thread when clearing the stitch fingers. Try
again, turning corners takes a little practice!
1. Reinforce loosely woven fabrics at the corner with stay-stitch
-
ing on a sewing machine. Clip to the corner (fig. A).
2. Align the fabric edge with the the left inside edge of the cutting
blade, and stitch until the cutting blade reaches the corner, not
the needles. Don't cut into the corner (fig. B).
3. Lower the needle(s) to anchor the fabric.
4. Raise the presser foot and straighten out the fabric, forming a
pleat at the corner (fig. C).
5. Be sure the marked stitching line (stay-stitching) is straight,
lower the presser foot and continue serging the remaining
edge. When done correctly, the pleat will disappear after
stitching (fig. D).
AA
AA
BB
BB
CC
CC
DD
55
T
E
C
H
N
I
Q
U
E
S
Bekijk gratis de handleiding van Baby Lock Splendor BLSP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Splendor BLSP8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18882 MB |