Baby Lock Splendor BLSP8 handleiding
Handleiding
Je bekijkt pagina 39 van 82
Looper
Thread
Needle
Thread
Wrong
Side
Wrong
Side
Right
Side
Right
Side
2-Thread Flatlock – Wide
When sewn on a fold, flatlocking can create a decorative effect
within the body of a garment or project. Either follow placement
lines on your fabric or design your own special effects by stitch
-
ing the fabric before laying out pattern pieces.
With stitching completed open the fabric fold and gently pull
both sides until the stitching lies flat (fig. A). Be sure to sew a
test sample first.
For "loops" (lower looper thread) to show on the right side, place
fabric wrong sides together.
To produce the "ladder" (needle thread) on the outside, place
the fabric right sides together (fig. D page 37).
Position the fabric under the presser foot, aligning the fold of
the fabric 1/8 inch (3.5mm) to the left of the upper cutting blade.
NOTE: If the fabric does not pull completely flat under the stitch
-
es, guide the fabric fold further to the left so that the loops hang
slightly off the fabric fold when stitching (fig.C).
Follow the suggested settings and threading diagram below
making sure the stitch selector lever is set a A.
Instructions for Upper/ Lower, Overlock Needle(s) threading
(See pages 19-21 and 23).
AA
BB
CC
NEEDLES
O-1
LENGTH
2 - 2.5
WIDTH
7.5
STITCH SELECTOR
A
BL
2
O
2
1
1
3
LLLL
O1
O1
①
②
O
V
E
R
L
O
C
K
S
T
I
T
C
H
E
S
36
Bekijk gratis de handleiding van Baby Lock Splendor BLSP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Splendor BLSP8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18882 MB |