Baby Lock Gallant XL Stationary Handleiding (60 Pagina's)

Handleiding

18 | www.BabyLock.com

Installation and Setup

Spool Pin and Thread Mast

To install the spool pin on the machine

1. You'll need the spool pin with nut and

washer.

2. Remove the nut and washer.

3. Place the washer against the top of the

machine cover.

4. Screw the nut onto the spool pin all the

way.

5. Place the spool pin through the washer

and into the top cover and tighten it all

the way.

6. Hold the spool pin rmly and tighten

the nut with the 8mm wrench

(provided). Do not over tighten.

To install the thread mast onto the

machine

1. You'll need the thread mast with washer

and nut.

2. Remove the nut and washer.

3. Place the washer against the top of the

machine cover.

4. Screw the nut onto the thread mast all

the way.

5. Place the thread mast through the

washer and into the top cover and

tighten it down to the nut. Turn until

the loop of the mast is directly over the

spool pin.

6. Hold the thread mast rmly and tighten

the nut with a 10mm wrench (provided).

Do not over tighten.

Bekijk gratis de handleiding van Baby Lock Gallant XL Stationary, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.