Axxess AXVI-6502 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
CONNECTIONS
From the AXVI-6502 harness to the aftermarket radio, connect the:
• Black wire to the ground wire.
• Yellow wire to the battery wire.
• Red wire to the accessory wire.
• Blue wire to the power antenna wire.
• Orange wire to the illumination wire (if applicable).
• Gray wire to the front right positive speaker output.
• Gray/Black wire to the front right negative speaker output.
• White wire to the front left positive speaker output.
• White/Black wire to the front left negative speaker output.
• Purple wire to the rear right positive speaker output.
• Purple/Black wire to the rear right negative speaker output.
• Green wire to the rear left positive speaker output.
• Green/Black wire to the rear left negative speaker output.
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Blue/Pink wire to the VSS/speed sense wire.
• Green/Purple wire to the reverse wire.
• Light Green wire to the parking brake wire
12-pin AXSWC harness & 3.5mm jack:
The 12-pin AXSWC harness & 3.5mm jack is to be used with the AXSWC (sold separately)
to retain steering wheel audio controls. If the AXSWC is not being used, disregard this
harness. If it is to be used, refer to the AXSWC instructions for radio connections and
programming. Disregard the harness that comes with the AXSWC.
Bekijk gratis de handleiding van Axxess AXVI-6502, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXVI-6502 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 327 MB |
