Axxess AXUSB-NI1 handleiding
Handleiding
Je bekijkt pagina 1 van 2

AXUSB-NI1
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
1-800-221-0932 1-800-221-0932metraonline.com metraonline.com
REV. 1/31/20 REV. 1/31/20
AXUSB-NI1
AXUSB-NI1 AXUSB-NI1
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
1-800-221-0932 1-800-221-0932metraonline.com metraonline.com
REV. 1/31/20 REV. 1/31/20
Introduction
The AXUSB-NI1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AXUSB-NI1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AXUSB-NI1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AXUSB-NI1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
AXUSB-NI1
USB adaptor for select Nissan vehicles
AXUSB-NI1
USB adaptor for select Nissan vehicles
AXUSB-NI1
USB adaptor for select Nissan vehicles
AXUSB-NI1
USB adaptor for select Nissan vehicles
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
APPLICATIONSAPPLICATIONS
APPLICATIONS APPLICATIONS
Bekijk gratis de handleiding van Axxess AXUSB-NI1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Axxess |
Model | AXUSB-NI1 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 190 MB |