Axxess AXTO-MI2 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 8/27/25 INSTAXTO-MI2
INITIALIZING AND ADJUSTING THE AXTO-MI2
• Initialize the interface by turning the ignition on for 30 seconds, then turn the ignition
back off, and on again.
• If the speakers are too loud, or not loud enough, you can adjust the output by
following the steps below:
1. Locate the two potentiometers on the side of the interface, see image at right.
2. Using a small flat-blade screwdriver, turn the gain knob clockwise to make it
louder, or counterclockwise to make it lower.
Mid/High
speaker control
Subwoofer control
Turn Clockwise to make louder
Turn Counterclockwise to lower
Potentiometer Adjustments
Side View
Scan QR Code for AXSWC
Connections/Programming
Bekijk gratis de handleiding van Axxess AXTO-MI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTO-MI2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 691 MB |
