Axxess AXTC-VW1 handleiding
Handleiding
Je bekijkt pagina 4 van 4
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 8/27/25 INSTAXTC-VW1
INSTALLATION INSTRUCTIONS
AXTC-VW1
Metra recommends MECP
certified technicians
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 5:00 PM
Sunday: 10:00 AM - 4:00 PM
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Pass
Fail
Pass
Fail
Pass
Pass
Fail
Fail
Note: If the LED light shows Solid Green for Pass (indicating
everything programmed correctly), yet the steering wheel
controls don’t work, check to ensure that the 3.5mm jack is
plugged in, and also plugged into the correct jack on the radio.
Once corrected, press the reset button, then program again
.
Final LED Feedback
At the end of programming the LED light will turn Solid Green which
indicates programming was successful. If the LED light didn’t turn
Solid Green, reference the list below to understand which programming
section the problem may stem from.
TROUBLESHOOTING
1. 2.
QR Code Scan Here
Further troubleshooting steps and information
can be located at:
axxessinterfaces.com/product/AXTC-VW1
LED Light
Radio
Programming
Section
Vehicle
Programming
Section
LED
Light
Reset
Button
If the interface fails to function,
press and release the reset
button, then repeat the
programming process from step
4 to try again.
Bekijk gratis de handleiding van Axxess AXTC-VW1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-VW1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 615 MB |
