Axxess AXTC-PO1 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 8/27/25 INSTAXTC-PO1
Open the driver’s door, and keep open during the programming process.
Cycle the ignition on.
Connect the AXTC-PO1 harness to the AXTC-PO1 interface, and then to
the wiring harness in the vehicle.
The LED light will go out, then once again quickly flash Green & Red
while the interface programs itself to the vehicle. Once programmed,
the LED light will go out again, then turn solid Green.
Cycle the ignition off, then back on.
Test all functions of the installation for proper operation.
Note: Audio Mode must be selected in the MFI menu to allow track up
and down to function. Refer to the vehicle owner’s manual for more
information.
PROGRAMMING
1.
2.
3.
4.*
5.*
6.
7.
8.
Green & Red LED
Green LED
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
Green & Red LED
Green or Red LED
Locate the Volume Up button on the steering wheel.
*
Program the interface by tapping/scrolling the Volume Up
button at a heartbeat pace/or scrolling up continuously
until the LED light stops flashing.
*Only applicable if vehicle came with steering wheel controls
† Vehicles with scroll wheel button
The LED light will flash Green & Red while the interface programs
the radio to the steering wheel controls. Once programmed, the
LED light will go out, then produce a pattern which will identify the
radio type installed. Refer to the Radio LED Feedback section under
Troubleshooting for radio types.
*Only applicable if vehicle came with steering wheel controls
†
Bekijk gratis de handleiding van Axxess AXTC-PO1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-PO1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 678 MB |
