Axxess AXTC-FOC handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 1/3/25 INSTAXTC-FOC
PROGRAMMING
Open the driver’s door, and keep open during the programming process.
Cycle the ignition on and wait (5) seconds, or until the factory display
screens reads LINE IN.
Connect the LD-SWCX-FOC harness to the AXTC-FOC interface, and then
to the wiring harness in the vehicle.
For (auto*) vehicles: Do not touch the steering wheel controls, the
interface will auto program.
*Only applicable if vehicle came with steering wheel controls
The LED light will flash Green & Red while the interface programs the
radio to the steering wheel controls. Once programmed, the LED light
will go out, then produce a pattern which will identify the radio type
installed
.
*Only applicable if vehicle came with steering wheel controls
The LED light will go out, then once again quickly flash Green & Red
while the interface programs itself to the vehicle. Once programmed,
the LED light will go out again, then turn solid Green.
Cycle the ignition off, then back on.
Test all functions of the installation for proper operation.
1.
2.
3.
4.*
*5.
6.
7.
8.
Green & Red LED
Green or Red LED
Green & Red LED
Green LED
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
VOL
+
Do Not Touch
X
Bekijk gratis de handleiding van Axxess AXTC-FOC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-FOC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 616 MB |
