Axxess AXTC-FD3 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
CONNECTIONS
Brown/White (NOT USED)
Blue Ground on Non-SYNC
application for reverse camera
Front
Rear
Sub
AUX-IN
Rear View
SWC
This is to be done only in the Ford Transit/Transit Connect
2019-Up without SYNC. To retain backup camera in anyother
application you must purchase the AXBUCH-FD1.
CENTER
Radio Connections
Black - Ground
Yellow - Battery power
Red - Accessory power
Orange/White - Illumination
Blue/Pink - VSS/Speed-Sense
Green/Purple - Reverse signal
Light Green - Parking brake
Gray - Front right speaker +
3.5mm Adapter (for vehicles without Steering wheel
controls or aftermarket radios with a wire for SWC)
Boss (with SWC wire): Key 1 (Gray) - Brown
Kenwood / JVC (with SWC wire): Blue/Yellow - Brown
XITE: SWC-2 - Brown
Key-A or SWC-1 - Brown
Key-B or SWC-2 - Brown/White
* After programming, assign SWC buttons within radio menu
Universal
Radio*
{
3.5mm Adapter for Vehicles without Steering wheel controls
1) From the 3.5mm adapter, tie the Brown and Brown/White wires together with tape or conntector
2) Connect the 3.5mm adapter to the 3.5mm jack from the AXTC-FD3 Harness.
3) Program the AXTC-FD3 per the instructions on page 3. Disregard steps 4 & 5
Gray/Black - Front right speaker -
White - Front left speaker +
White/Black - Front left speaker -
Green - Rear left speaker +
Green/Black - Rear left speaker -
Purple - Rear right speaker +
Purple/Black - Rear right speaker -
Blue/White - Amp turn on from radi
o
Aftermarket Radio
(radio’s features may vary)
Reset Button
LED Light
Vehicle Connectors
Bekijk gratis de handleiding van Axxess AXTC-FD3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-FD3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 675 MB |
