Axxess AXTC-FD1 handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
REV. 7/9/24 INSTAXTC-FD1
TROUBLESHOOTING
1.
QR Code Scan Here
Further troubleshooting steps and information can
be located at:
axxessinterfaces.com/product/AXTC-FD1
2.
Note: If the LED light shows Solid Green for Pass (indicating everything
programmed correctly), yet the steering wheel controls don’t work, check to
ensure that the 3.5mm jack is plugged in, and also plugged into the correct
jack on the radio. Once corrected, press the reset button, then program again.
Final LED Feedback
At the end of programming the LED light will turn Solid Green which indicates
programming was successful. If the LED light didn’t turn
Solid Green, reference the
list below to understand which programming
section the problem may stem from.
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Pass
Fail
Pass
Fail
Pass
Pass
Fail
Fail
LED Light
Radio
Programming
Section
Vehicle
Programming
Section
LED
Light
Reset
Button
If the interface fails to function,
press and release the reset
button, then repeat the
programming process from step
4 to try again.
Bekijk gratis de handleiding van Axxess AXTC-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-FD1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1545 MB |
