Axxess AXTC-A12 handleiding
Handleiding
Je bekijkt pagina 4 van 8
4
PROGRAMMING
Open the driver’s door, and keep open during the programming process.
Turn the key (or push-to-start button) to the ignition “ON” position.
Connect either the LD-AX-SWCX-AU1 or LD-AX-SWCX-AU2 harness to
the AXTC-A12 interface, and then to the wiring harness in the vehicle.
Program the interface by scrolling the Volume Wheel up at a heartbeat
pace until the LED light stops flashing.
The LED will flash Green & Red while the interface programs the radio to
the steering wheel controls. Once programmed, the LED will go out, then
produce a pattern which will identify the radio type installed. Refer to
the Radio LED Feedback section under Troubleshooting for radio types
.
1.
2.
3.
4.
5.
O
F
F
A
C
C
O
N
S
T
A
R
T
Green & Red LED
Green or Red LED
The LED will go out, then once again quickly flash Green & Red while
the interface programs itself to the vehicle. Once programmed, the LED
will go out again, then turn solid Green.
Cycle the ignition off, then back to the ignition “ON” position.
Test all functions of the installation for proper operation.
6.
7.
8.
Green & Red LED
Green LED
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
Bekijk gratis de handleiding van Axxess AXTC-A12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXTC-A12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 758 MB |
