Axxess AXSUB-FD1 handleiding
Handleiding
Je bekijkt pagina 4 van 4
INSTALLATION INSTRUCTIONS
AXSUB-FD1
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/17/25 AXSUB-FD1
TROUBLESHOOTING
1. Not getting sound from Factory radio’s speakers.
A) Make sure Factory Volume isn’t set to zero or a mute button has been pressed on radio.
B) Make sure 8pin male and female connectors are plugged in to each other.
2. Not getting 12v on the Amp on out to amp
A) Make sure LD-BASSKNOB isn’t turned all the way down(to left)
B) Your Orange and Black wires are properly connected from AXSUB-INTERFACE to
LD-BASSKNOB
3. Not getting 12v on the Amp on out to amp
A) Make sure the t-harness is seated properly at the radio and OE harness.
B) Make sure the RCA’s are connected to aftermarket amplifier.
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 5:00 PM
Sunday: 10:00 AM - 4:00 PM
Metra recommends MECP
certified technicians
Bekijk gratis de handleiding van Axxess AXSUB-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXSUB-FD1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 474 MB |
