Axxess AXSSO-GM2 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
I N STALL ATI O N
+
6
SSO
INTERFACE
T-HARNESSES
(LD-GM1-SSO
OR LD-GM2-SSO)
4
5
(Figure shown for illustration purposes only. Actual vehicle and installation locations will differ)
1. Open the hood and locate the hood pin switch
harness underneath the hood latch.
2. Unplug the hood pin switch harness, then plug in
the appropriate harness.
3. Route the power and ground wires to the vehicles
battery.
4. Connect the Black wire to the negative terminal.
5. Connect Yellow wire to the positive terminal.
6.
Find a safe and secure spot for the water resistant
AXSSO-GM2 interface, away from any heat sources
and moving parts. With the wiring harness facing
downward, zip tie the interface securely.
7. The installation is now complete.
Note: There are 2 T-harnesses to choose from.
Tech Tip! After install, if the check engine light
appears, remove ground connection that was
made to the battery and splice into the Brown
wire on the vehicle side of the T-harness.
Bekijk gratis de handleiding van Axxess AXSSO-GM2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXSSO-GM2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 445 MB |
