Axxess AXPIO-COL2 handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
REV. 7/25/24 INSTAXPIO-COL2
KIT PREPARATION
1. Cut and remove the specified (shaded) areas in the sub dash. (Figure A)
Continue to Kit Assembly
KIT ASSE MB LY
(Figure A)
Double DIN radio provision
1. Attach the
radio brackets
to the
radio trim panel
with (4) #8 x 3/8" Phillips screws provided with
this kit. (Figure A)
2. Slide the radio into the
bracket trim panel
assembly and secure with the
screws supplied
with the radio. (Figure B)
3. Clip the climate controls into the
radio trim panel
assembly.
4. Snap the climate control vents into the
radio trim
panel
assembly.
5. Locate the factory wiring harness and antenna
plug in the dash. Metra recommends using
the
proper mating adapters from Metra and/or
AXXESS.
6.
Complete all connections to the radio and
vehicle, reconnect the negative battery terminal,
and then test the aftermarket radio and vehicle
for proper operation.
7. Mount the radio assembly into the dash using the
factory screws.
8. Reassemble the dash in the reverse order of
disassembly to complete the installation.
(Figure A)
(Figure B)
Bekijk gratis de handleiding van Axxess AXPIO-COL2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXPIO-COL2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4463 MB |
