Axxess AXM50-GM1 handleiding
Handleiding
Je bekijkt pagina 2 van 8
2
CONNECTIONS
4-PIN MIC HDMI
CONNECT TO RADIO
To AXGMLN-09
Harness
LD-JUMP 10 PIN
LD-JUMP 12 PIN
Overall Gain Potentiometer*
RADIO
Plug into the Connector you
unplugged from the CD Player.
Cut RCAs and wire
to speaker level
if you have low sound.
22 Pin
8 Pin
8 Pin
10 Pin
LED
INITIALIZATION STEPS : These steps are to be done right after
AXGMLN-09 has been programmed.
1. After all connections are made, turn on the ignition
2. Look at the LED on the AXM50-GM1 and wait for the LED to go solid RED
3. Once LED is solid RED, cycle ignition and test
Rear View
RCAs
Connect to the 8 PIN MOST
connector at tuner
To AXGMLN-09
Interface
From the 10-pin or 12-pin jumper harness to the vehicle:
If the vehicle
does not
have a CD or DVD-Drive, disregard these steps.
For models
without
rear seat entertainment:
• Connect the female Black 10-pin jumper harness, to the male
Black 10-pin harness removed from the CD-Drive.
For models
with
rear seat entertainment:
• Connect the female Black 12-pin jumper harness, to the male
Black 12-pin harness removed from the DVD-Drive.
Note: Even though this step must be done for models with rear
seat entertainment, the rear seat entertainment system will not be
retained by this interface
.
*To Adjust Overall Gain:
1. With a small flat-blade screwdriver, adjust the potentiometer
clockwise to raise the audio level; counterclockwise to lower the
audio level.
2. Once at a desired level, audio level adjustment is complete.
Bekijk gratis de handleiding van Axxess AXM50-GM1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXM50-GM1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 952 MB |
