Axxess AXLOC4M-150 handleiding
Handleiding
Je bekijkt pagina 2 van 2
AXLOC4M-150 AXLOC4M-150
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AXLOC4M-150 AXLOC4M-150
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 12/13/19 REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 12/13/19 REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
Wire color and function
The audio and power input wire colors are an EIA standard for car stereo applications as follows:
Wire color and function
The audio and power input wire colors are an EIA standard for car stereo applications as follows:
Wire color and function
The audio and power input wire colors are an EIA standard for car stereo applications as follows:
Wire color and function
The audio and power input wire colors are an EIA standard for car stereo applications as follows:
Input harness
White = left front (+) input
White/Black = left front (-) input
Gray = right front + input
Gray/Black = right front (-) input
Green = left rear (+) input
Green/Black = left rear (-) input
Purple = right rear (+) input
Purple/Black = right rear (-) input
Power harness
Yellow = battery +12v input
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
Input harness
White = left front (+) input
White/Black = left front (-) input
Gray = right front + input
Gray/Black = right front (-) input
Green = left rear (+) input
Green/Black = left rear (-) input
Purple = right rear (+) input
Purple/Black = right rear (-) input
Power harness
Yellow = battery +12v input
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
Input harness
White = left front (+) input
White/Black = left front (-) input
Gray = right front + input
Gray/Black = right front (-) input
Green = left rear (+) input
Green/Black = left rear (-) input
Purple = right rear (+) input
Purple/Black = right rear (-) input
Power harness
Yellow = battery +12v input
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
Input harness
White = left front (+) input
White/Black = left front (-) input
Gray = right front + input
Gray/Black = right front (-) input
Green = left rear (+) input
Green/Black = left rear (-) input
Purple = right rear (+) input
Purple/Black = right rear (-) input
Power harness
Yellow = battery +12v input
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
Note:
Be sure that all audio input connections are polarized or in phase with each other. Failure to do this will result in
poor bass response and low quality audio.
Adjusting the LOC for maximum performance: After completing all of the necessary connections, turn the LOC adjustment
pots all of the way down by rotating them completely counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots on the LOC
and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pots to the same position as
the previously adjusted pot. The audio set-up of the LOC is now complete and ready to be enjoyed.
Note:
Be sure that all audio input connections are polarized or in phase with each other. Failure to do this will result in
poor bass response and low quality audio.
Adjusting the LOC for maximum performance: After completing all of the necessary connections, turn the LOC adjustment
pots all of the way down by rotating them completely counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots on the LOC
and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pots to the same position as
the previously adjusted pot. The audio set-up of the LOC is now complete and ready to be enjoyed.
Note:
Be sure that all audio input connections are polarized or in phase with each other. Failure to do this will result in
poor bass response and low quality audio.
Adjusting the LOC for maximum performance: After completing all of the necessary connections, turn the LOC adjustment
pots all of the way down by rotating them completely counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots on the LOC
and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pots to the same position as
the previously adjusted pot. The audio set-up of the LOC is now complete and ready to be enjoyed.
Note:
Be sure that all audio input connections are polarized or in phase with each other. Failure to do this will result in
poor bass response and low quality audio.
Adjusting the LOC for maximum performance: After completing all of the necessary connections, turn the LOC adjustment
pots all of the way down by rotating them completely counter-clockwise. Now, turn the stereo system on and adjust the
main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots on the LOC
and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pots to the same position as
the previously adjusted pot. The audio set-up of the LOC is now complete and ready to be enjoyed.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Metra recommends MECP
certified technicians
Metra recommends MECP
certified technicians
Metra recommends MECP
certified technicians
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
Bekijk gratis de handleiding van Axxess AXLOC4M-150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXLOC4M-150 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 217 MB |
