Axxess AXHN-3 handleiding
Handleiding
Je bekijkt pagina 8 van 8
Metra recommends MECP
certified technicians
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 5/19/25 INSTAXHN-3
INSTALLATION INSTRUCTIONS
AXHN-3
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 5:00 PM
Sunday: 10:00 AM - 4:00 PM
Solid Green
Slow Red Flash
Slow Green Flash
Solid Red
Pass
Fail
Pass
Fail
Pass
Pass
Fail
Fail
Note: If the LED shows Solid Green for Pass (indicating
everything programmed correctly), yet the steering wheel
controls don’t work, make sure that the 3.5mm jack is plugged
in, and plugged into the correct jack in the radio. Once
corrected, press the reset button, then program again
.
Final LED Feedback
At the end of programming the LED will turn Solid Green which
indicates programming was successful. If the LED didn’t turn Solid
Green, reference the list below to understand which programming
section the problem may stem from.
1. 2.
QR Code Scan Here
Further troubleshooting steps and
information can be located at:
axxessinterfaces.com/product/AXHN-3
LED Light
Radio
Programming
Section
Vehicle
Programming
Section
LED
Light
Reset
Button
If the interface fails to function,
press and release the reset
button, then repeat the
programming process from step
4 to try again.
TROUBLESHOOTING
Bekijk gratis de handleiding van Axxess AXHN-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXHN-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1041 MB |
