Axxess AXGMLN-10 handleiding

Niet gecategoriseerd

Axxess

4 pagina's

PDF beschikbaar

Handleiding

AXGMLN-10

INSTALLATION INSTRUCTIONS

INTERFACE COMPONENTS

OPTIONAL ACCESSORIES (sold separately)

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Small flat-blade screwdriver

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

Adjustments ...........................................................3

Troubleshooting.....................................................3

LD-BACKUPCAM4T Notes .......................................4

Data Interface

Fits Select GM Models* 2016-2021

*2018-Up Trucks w/IOB refer to LD-BACKUPCAM4T page 4

APPLICATIONS

• AXGMLN-10 interface

• AXGMLN-10 harness

• 16-pin harness with stripped leads

• LD-BACKUPCAM4T

Extension Harness: AXEXH-GM10

Steering Wheel Control Interface: AXSWC

The IOA/IOB code, if applicable, can be found in the Service Parts Identification label located in: Glovebox: Canyon/Colorado/Cruze/Equinox/Silverado/Sierra – Rear Compartment Floor: Malibu

INTERFACE FEATURES

• Designed for non-amplified systems or bypassing a factory amplifier

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (Retained Accessory Power)

•

Provides NAV outputs (parking brake, reverse, mute, and speed sense)

• Prewired AXSWC harness included (AXSWC sold separately)

•

Retains warning chimes and balance and fade with adjustable gain control

• Retains OnStar

/OE Bluetooth

connectivity

• Adjustable gain control for chimes and OnStar

• Retains the factory backup camera

• Can be used with extension AXEXH-GM10

• Micro “B” USB updatable

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle

specific applications 2018-Up Trucks w/IOB refer to page 4

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

CHEVROLET

Colorado (RPO IOB) .......................... 2017-2021

Cruze (RPO IOA) ...............................2016-2018

Equinox (RPO IOB) ....................................2018

Malibu (RPO IOA) .............................2016-2018

Silverado LD (RPO IOB) .............................2019

Silverado (RPO IOB) ......................... 2016-2018

Silverado 2500 / 3500 HD (RPO IOB

)

...2016-2019

Trax (RPO IOA) ................................ 2017-2020

GMC

Acadia (RPO IOB) .............................2017-2019

Canyon (IOB) .................................... 2017-2018

Sierra (RPO IOB) ............................... 2016-2018

Sierra Limited (RPO IOB) .......................... 2019

Sierra 2500 / 2500 HD (RPO IOB) .... 2016-2019

Bekijk gratis de handleiding van Axxess AXGMLN-10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.