Axxess AXFD-PTT handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
CONNECTIONS
• Connect the Gray/Red to the Gray/Red of the AXFD-PTT.
(FOR PROGRAMING REFER TO THE AXSWC instructions)
WHEN USING THE THE AXSWC:
WHEN USING A TURBO/TACTILE KIT:
Tape off
To Gray/Red wire of AXFD-PTT
• From the 24 pin connector, cut the Yellow/Red wire in half and tape off the half going to the 24 pin.
(See Tape off image below)
• Connect the other half of the Yellow/Red wire to the Gray/Red wire of the AXFD-PTT.
(See To Gray/Red wire image below)
• Once your connections are spliced you can now reconnect your interface and wait until the screen reads
SWC Configured
, and then test your aftermarket radio for proper operation.
Bekijk gratis de handleiding van Axxess AXFD-PTT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXFD-PTT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 756 MB |
