Axxess AXDSPX-TES1 handleiding
Handleiding
Je bekijkt pagina 10 van 20
10
It is recommended to use the factory speaker wires when connecting to your aftermarket equipment. In vehicles that use A2B communications the factory amplifier powers specific
speakers in the vehicle. The remaining speakers are powered off the factory radio. The speaker connectors found behind the glove box could be one of two harnesses, both are included
with the interface and allow for quick access to the OE speaker. Additional speaker wires will be needed to run from the radio chassis to the aftermarket amplifier’s location.
Due to the variation from the factory speaker wire location and colors it is critical that the speaker wire charts be used when wiring your aftermarket equipment. The supplied T-harnesses
will not follow the standard speaker wire colors. It is recommended that each speaker wire be double checked using a tone generator and polarity tester.
IMPORTANT INFORMATION ABOUT SUPPLIED T-HARNESSES
EXAMPLE
Location: At the Radio
LD-TES-SPK
16 Pin
Radio
Bypass Harness (Behind Glove Box)
SPEAKER LOCATION LABEL NAME AXXESS COLOR POLARITY
Center Speaker 9
Brown/Black
-
Brown
+
Left Front Door Tweeter
Speaker 10
Gray
+
Gray/Black
-
Right Front Tweeter Speaker 11
White/Black
-
White
+
Bekijk gratis de handleiding van Axxess AXDSPX-TES1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-TES1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2502 MB |
