Axxess AXDSPX-GMM50 handleiding
Handleiding
Je bekijkt pagina 3 van 12
3
REV. 5/9/25 INSTAXDSPX-GMM50
INSTALLATION
1. Locate the factory amp (†), unplug all connectors, then remove the amp.
2. Install the AXDSPX-GMM50 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
3. Plug the 8-pin and 16-pin connectors from the AXDSPX-GMM50 harness into the
AXDSPX-GMM50 interface.
4. Download and install the AX-DSP-XL app for your smart device.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-GMM50. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-GMM50 harness.
8. Click the Identify button to confirm that the AXDSPX-GMM50 is connected properly. If so,
a chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9.
Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.
(Figure A)
(Figure B)
Bekijk gratis de handleiding van Axxess AXDSPX-GMM50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-GMM50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2319 MB |
