Axxess AXDSPH-HN1 handleiding
Handleiding
Je bekijkt pagina 5 van 8
5
REV. 8/12/22 INSTAXDSPH-HN1
ADDING A FULL-RANGE AMP & SUBWOOFER TO A FACTORY SYSTEM
SUB
Factory Radio
Factory Radio Harness
Interface
Cut the male
connector off and
connect speaker
wires to amp
White / Front Left +
White/Black / Front Left -
Gray / Front Right +
Gray/Black Front Right -
Green / Rear Left +
Green/Black / Rear Left -
Purple / Rear Right +
Purple/Black / Rear Right -
Any remaining wires
tape off and disregard
Vehicle T-Harness
Bass Knob
Blue/White - Amp Turn-On Wire
Unplug connector
Any remaining wires
tape off and disregard
Black - Ground
Orange - Control
An SPDT relay, Metra part number
E-123, is required if the amp turn-on
current of all amps exceeds 1-amp.
RCA Jacks
(sold separately)
Interface Harness
DSP Interface
(sold seperately)
Bass Knob included
with DSP interface
Channels 6 through 10 are only
available when using the AXDSP-X
Output Harness included with DSP interface
Bekijk gratis de handleiding van Axxess AXDSPH-HN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPH-HN1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 772 MB |
