Axxess AXDSP-X handleiding
Handleiding
Je bekijkt pagina 2 van 20
2
Aftermarket radio system:
The AXDSP-X can be used with an aftermarket radio to improve the overall listening
experience for car audio enthusiasts. Installers will connect the RCA inputs from the AXDSP-X
to the outputs from the aftermarket radio; Front, Rear, Sub (sub is optional).
(refer to page 4)
Adding a subwoofer to an existing radio:
This feature offers the Installer the ability to add an aftermarket subwoofer to an existing
radio. (refer to page 5)
Full range system to an existing radio:
This option allows the Installer to wire the AXDSP-X directly to the speaker outputs from an
existing radio for a full range audio signal (high-level).
(refer to page 6)
PREFACE
INSTALLATION OPTIONS
In the following section, Installation Options, choose the installation type, then either click on
the hyperlink, or reference the page number.
The AXDSP-X provides a 12v 1-amp output to turn on an aftermarket amplifier. If installing
multiple amplifiers, an SPDT automotive relay will be required if the current exceeds that
amount. Use Metra part number E-123 (sold separately) for best results.
The AXDSP-X can also grow as your stereo system grows. Start off by adding a subwoofer, then
add on from there. Simply reference the Installation Options page to change the AXDSP-X to the
new system. All 10 channels of the AXDSP-X can be assigned however needed for the installation
at hand. If 10 channels of a subwoofer signal is needed, the AXDSP-X can do it.
Bekijk gratis de handleiding van Axxess AXDSP-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSP-X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3902 MB |
