Axxess AXDIS-GMLN31 handleiding
Handleiding
Je bekijkt pagina 7 van 8
7
REV.11/1/24 INSTAXDIS-GMLN31
Note:
If the next function on the list is not on the steering wheel, press the Volume-Up button
for (1) second until the LED comes on, and then release the Volume-Up button. This will tell the
AXDIS-GMLN31 that this function is not available and it will move on to the next function.
5. To complete the remapping process, press and hold the Volume-Up button on the steering
wheel until the LED in the AXDIS-GMLN31 goes out.
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push to Talk) *
13. On-Hook *
14. Off-Hook *
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
Button Assignment Legend
Note:
Not all radios will have all of these commands. Please refer to the manual provided with the
radio, or contact the radio manufacturer for specific commands recognized by that particular radio.
* Not applicable in this application
STEERING WHEEL CONTROL SETTINGS (CONT)
Dual Assignment Instructions (Long Button Press)
The AXDIS-GMLN31 has the capability to assign (2) functions to a single button, except Volume-Up
and Volume-Down. Follow the steps below to program the button(s) to your liking
.
Note:
Seek-Up and Seek-Down come pre-programmed as Preset-Up and Preset-Down for a
long button press.
1. Turn on the ignition but do not start the vehicle.
2. Press and hold down the steering wheel control button that you want to assign a long press
function to for about (10) seconds, or until the LED flashes rapidly. At this point release the
button; the LED will then go solid.
3.
Press and release the Volume-Up button the number of times corresponding to the new
button number selected. Refer to the Dual Assignment Legend. The LED will flash rapidly while
the Volume-Up button is being pressed, and then go back to a solid LED once released. Go to
the next step once the Volume-Up button has been pressed the desired number of times.
Caution:
If more than (10) seconds elapses between pressing the Volume-Up button, this
procedure will abort, and the LED will go out.
4. To store the long press button in memory, press the button that you assigned a long press
button to (the button held down in Step 2). The LED will now go off indicating the new
information has been stored.
Note:
These steps must be repeated for each button you would like to assign a dual
purpose feature to. To reset a button back to its default state, repeat Step 1, and then
press the Volume-Down button. The LED will go out, and the long press mapping for that
button will be erased.
Bekijk gratis de handleiding van Axxess AXDIS-GMLN31, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDIS-GMLN31 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 887 MB |
