Axxess AXDIS-GMLN11 handleiding

12 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 12
5
REV. 11/1/24 INSTAXDIS-GMLN11
PROGRAMMING THE AXDIS-GMLN11
For the steps below, the LED located inside the interface can only be seen while active. The
interface does not need to be opened to see the LED.
1. Start the vehicle.
2. Connect the AXGMLAN11-SWC harness to the wiring harness in the vehicle.
3. The LED will initially turn on solid Green, then turn off for a few seconds while it auto
detects the radio installed.
4. The LED will then flash Red up to (24) times indicating which radio is connected to the
interface, and then turn off for a couple of seconds. Pay close attention to how many Red
flashes there are. This will help in troubleshooting, if needed. Refer to the LED Feedback
section for more information.
5. After a couple seconds the LED will turn on solid Red while the interface auto detects the
vehicle. The radio will shut off at this point. This process should take 5 to 30 seconds.
6. Once the vehicle has been auto detected by the interface, the LED will turn on solid Green,
and the radio will come back on, indicating programming was successful.
7. Immediately after the radio comes back on, the following buttons on the steering wheel
must be pressed in the exact sequence as shown. For each button press, the LED will turn on
momentarily. If a button is not present, press Volume-Up to skip that button.
• Volume-Up
Seek Up
• Volume-Up
PTT (OnStar
®
) or MUTE
• Volume-Up
8. The LED will turn on after the last Volume-Up button has been pressed, indicating
programming has ended.
9. Test all functions of the installation for proper operation, before reassembling the dash.
10.
If the interface fails to function, refer to Resetting the AXDIS-GMLN11, then resume from step 7.
Notes: • PTT (OnStar
®
) when pressed will Mute/Attenuate the radio.
• PTT (OnStar
®
) when pressed and held for 2 seconds will activate OnStar
®
, if applicable.
• The LED will turn on solid Green for a moment, and then turn off under normal
operation after the key has been cycled.

Bekijk gratis de handleiding van Axxess AXDIS-GMLN11, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAxxess
ModelAXDIS-GMLN11
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1055 MB