Axxess AXDIS-FD1 handleiding

Niet gecategoriseerd

Axxess

12 pagina's

PDF beschikbaar

Handleiding

STEERING WHEEL CONTROL SETTINGS

Continued on the next page

Flash Count

Radio

Eclipse (type 1) †

Kenwood ‡

Clarion (type 1) †

Sony / Dual

JVC

Pioneer / Jensen

Alpine *

Visteon

Valor

Clarion (type 2) †

Metra OE

Eclipse (type 2) †

Flash Count

Radio

Parrot **

XITE

Philips

TBA

JBL

Insane

Magnadyne

Boss

Axxera

Axxerra (type 2)

Alpine (type 2)

LED Feedback Legend

LED Feedback: The (24) Red LED flashes represent a different radio manufacturer for the AXDIS-FD1 SWC interface to detect. For example, if you are installing a JVC radio, the SWC interface will flash

Red (5) times, then stop. Following is the LED Feedback Legend, which indicates the flash count of the radio manufacturer.

KEYNOTES

* If the SWC interface flashes RED (7) times, and an Alpine radio is not installed, that means there is an open connection not accounted for. Verify that the 3.5mm jack is connected to the

correct steering wheel jack/wire in the radio.

** The AXSWCH-PAR is required (sold separately). Also, the software in the radio must be rev. 2.1.4 or higher.

† If a Clarion or Eclipse radio is installed and the steering wheel controls do not function, change the radio to Clarion (type 2) or Eclipse (type 2) respectively. If the steering wheel controls still

do not function, refer to the Changing Radio Type document on the next page, also available at axxessinterfaces.com.

‡ If a Kenwood radio is installed and the LED feedback flashes (5) times instead of (2), manually change the radio type to Kenwood. To do this, refer to the Changing Radio Type instructions on

the next page, also available at axxessinterfaces.com.

Bekijk gratis de handleiding van Axxess AXDIS-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.