Axxess AXDI-GM3 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 8/11/23 INSTAXDI-GM3
I N STALL ATI O N
PROGRAMMING
With the key in the off position:
• Connect the LD-LCGM-03 harness into the interface, and then to the wiring harness in the vehicle.
Attention! If the interface loses power for any reason, the following steps will need to be performed again. Also, if installing an
AXSWC connect it after you initialize and test the interface/radio, with the key in the off position.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the off position, disconnect the interface, check all
connections, reconnect the interface, and then try again.
• Turn the key to the off position, and then to the accessory position. Test all functions of the installation for proper operation,
before reassembling the dash.
Bekijk gratis de handleiding van Axxess AXDI-GM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDI-GM3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 483 MB |
