Axxess AXBUCS-SB286V2 handleiding
Handleiding
Je bekijkt pagina 2 van 4
AXBUCS-SB286V2 AXBUCS-SB286V2
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AXBUCS-SB286V2 AXBUCS-SB286V2
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 6/19/25 REV. 6/19/25© COPYRIGHT 2025 METRA ELECTRONICS CORPORATION © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 6/19/25 REV. 6/19/25© COPYRIGHT 2025 METRA ELECTRONICS CORPORATION © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
Metra recommends MECP
certified technicians
Connections
• Connect the Black wire to chassis ground, and also to the Black wire from the AXCSD-6V.
• Connect the Red wire labeled "Camera Power 6V" to the Blue/Red wire from the AXCSD-6V.
• If retaining steering wheel controls: connect the Red wire labeled “AXSWC 12V Accessory” to
accessory power.
• Connect the Green/Purple wire to the reverse wire from the radio, and also to the Blue/White
wire from the AX CAM6V.
• Connect the Yellow RCA jack to the backup camera input from the radio.
• If retaining the factory AUX-IN jack, connect the Red and White RCA jacks to the AUX input
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AXBUCS-SB286V2 harness to the wiring harness in the vehicle, then to the AXSWC.
2. Refer to the AXSWC instructions for radio connections and programming. Disregard the harness
that comes with the AXSWC.
Metra recommends MECP
certified technicians
Connections
• Connect the Black wire to chassis ground, and also to the Black wire from the AXCSD-6V.
• Connect the Red wire labeled "Camera Power 6V" to the Blue/Red wire from the AXCSD-6V.
• If retaining steering wheel controls: connect the Red wire labeled “AXSWC 12V Accessory” to
accessory power.
• Connect the Green/Purple wire to the reverse wire from the radio, and also to the Blue/White
wire from the AX CAM6V.
• Connect the Yellow RCA jack to the backup camera input from the radio.
• If retaining the factory AUX-IN jack, connect the Red and White RCA jacks to the AUX input
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AXBUCS-SB286V2 harness to the wiring harness in the vehicle, then to the AXSWC.
2. Refer to the AXSWC instructions for radio connections and programming. Disregard the harness
that comes with the AXSWC.
Metra recommends MECP
certified technicians
Connections
• Connect the Black wire to chassis ground, and also to the Black wire from the AXCSD-6V.
• Connect the Red wire labeled "Camera Power 6V" to the Blue/Red wire from the AXCSD-6V.
• If retaining steering wheel controls: connect the Red wire labeled “AXSWC 12V Accessory” to
accessory power.
• Connect the Green/Purple wire to the reverse wire from the radio, and also to the Blue/White
wire from the AX CAM6V.
• Connect the Yellow RCA jack to the backup camera input from the radio.
• If retaining the factory AUX-IN jack, connect the Red and White RCA jacks to the AUX input
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AXBUCS-SB286V2 harness to the wiring harness in the vehicle, then to the AXSWC.
2. Refer to the AXSWC instructions for radio connections and programming. Disregard the harness
that comes with the AXSWC.
Metra recommends MECP
certified technicians
Connections
• Connect the Black wire to chassis ground, and also to the Black wire from the AXCSD-6V.
• Connect the Red wire labeled "Camera Power 6V" to the Blue/Red wire from the AXCSD-6V.
• If retaining steering wheel controls: connect the Red wire labeled “AXSWC 12V Accessory” to
accessory power.
• Connect the Green/Purple wire to the reverse wire from the radio, and also to the Blue/White
wire from the AX CAM6V.
• Connect the Yellow RCA jack to the backup camera input from the radio.
• If retaining the factory AUX-IN jack, connect the Red and White RCA jacks to the AUX input
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AXBUCS-SB286V2 harness to the wiring harness in the vehicle, then to the AXSWC.
2. Refer to the AXSWC instructions for radio connections and programming. Disregard the harness
that comes with the AXSWC.
Bekijk gratis de handleiding van Axxess AXBUCS-SB286V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXBUCS-SB286V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 357 MB |
