Axxess AXBUCS-NI326V handleiding
Handleiding
Je bekijkt pagina 2 van 4
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/19/25 INSTAXBUCS-NI326V
INSTALLATION INSTRUCTIONS
AXBUCS-NI326V
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 5:00 PM
Sunday: 10:00 AM - 4:00 PM
Metra recommends MECP
certified technicians
• Connect the Black wire to chassis ground, and also to the Black wire of the AXCSD-6V.
• Connect the Red wire labeled “Camera Power 6V” to the Blue/Red wire of the AXCSD-6V.
• Connect the Green/Purple wire to the reverse wire of the aftermarket radio, and also to the
Blue/White wire of the AXCSD-6V.
• Connect the Yellow RCA jack to the rear camera input of the aftermarket radio.
12-pin pre-wired AXSWC harness: For the Altima sedan 2013-2015 / Rogue 2014-2017:
This harness is to be used along with the optional AXSWC (not included) to retain
steering wheel audio controls. Please refer to the AXSWC instructions for radio connections
and programming.
Note: Disregard the harness that comes with the AXSWC.
• Connect the unlabeled Red wire to the accessory wire on the aftermarket radio.
Bekijk gratis de handleiding van Axxess AXBUCS-NI326V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXBUCS-NI326V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 540 MB |
