Axxess AXBK-1 handleiding
Handleiding
Je bekijkt pagina 1 van 2
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
1-800-221-0932 www.axxessinterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
Axxess bassknob for AXDSP-X
subwoofer control
AXBK-1
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted
.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
Bekijk gratis de handleiding van Axxess AXBK-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXBK-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 132 MB |
