Axxess AXAMP-FD1 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
Adding a subwoofer to a factory system:
This feature offers the ability to add a subwoofer to a factory system, whether amplified or non-
amplified (Refer to Page 3)
Adding a full-range amp and subwoofer to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system, whether amplified*
or non-amplified. (Refer to Page 3)
*
For amplified models the amp must be bypassed/unplugged.
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio*, then unplug all connectors.
2. Install the AXAMP-FD1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. Plug the AXAMP-FD1 vehicle T-harness to the AXAMP-FD1 interface.
4. Plug the AXAMP-FD1 interface harness to the AXAMP-FD1 interface.
5. Connect the amp turn-on wire.
6. Adjust your aftermarket amplifier to a desired listening level.
* Refer to metraonline.com for dash disassembly. If Metra makes a dash kit for the
vehicle, disassembly will be within those instructions.
INSTALLATION OPTIONS INSTALLATION
Bekijk gratis de handleiding van Axxess AXAMP-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXAMP-FD1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 631 MB |
