Axxess AXAC-CH4 handleiding
Handleiding
Je bekijkt pagina 6 van 16
6
INSTALLATION
With the ignition cycled off:
1. Remove the harnesses from the factory
radio, then install the AXAC-CH4 vehicle
harness in between.
2. Connect the AXAC-CH4 vehicle harness
to the AXAC-CH4 interface harness.
3. Connect the AXAC-CH4 interface harness
to the AXAC-CH4 interface.
4. Make sure the camera(s) is connected to
the appropriate input.
5. Make sure the interface has been
configured beforehand as shown in
the Configuration section. Failure to
configure the interface will result in the
interface not functioning properly.
TO VEHICLE HARNESS
Camera
4
Camera
3
Camera
2
Camera
Output
Camera
1
Camera
Output
Camera
12V
Camera
Output
Camera
Input
Camera
Output
Camera
Output
FACTORY RADIO
Gray/Blue - Control 1
Gray/Red - Control 2
Orange - Control 3
Orange/White - Control 4
Radio Connections
LD-AC-CH4
LD-AX-BACKUP
14 PIN
20 PIN
Green/Blue - VSS Output (NOT USED)
Blue/Green - VSS Input (NOT USED)
If vehicle does not come
with a factory camera,
disregard female connector.
Both connectors
are always used.
Bekijk gratis de handleiding van Axxess AXAC-CH4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXAC-CH4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2473 MB |
