Axxess AXABH-TY1 handleiding
Handleiding
Je bekijkt pagina 1 van 4
A X ABH -T Y1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/25/25 INSTAXABH-TY1
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Amplifier Location .................................................2
Connections ............................................................3
Amplifier Bypass Harness
Fits Select Toyota Sienna Models 2004-2014
• Amplifier bypass harness
• Vehicle-specific harness to bypass the factory amplifier
• Allows loose wires to wire to an aftermarket amplifier
• Saves the installer unnecessary labor and wire
Always verify speaker output by testing with a tone generator, or similar device before making
connections. The output locations follow the manufacturers’ terminology for the speakers.
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
APPLICATIONS
Toyota
Sienna (Amplified) .........................2004-2014
INTERFACE FEATURES
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this
product. Ensure that all installation connections,
especially the air bag indicator lights, are plugged in
before reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
Bekijk gratis de handleiding van Axxess AXABH-TY1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXABH-TY1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 268 MB |
