Axxess AXA2B-FD1 handleiding
Handleiding
Je bekijkt pagina 2 van 2
AXA2B-FD1 AXA2B-FD1
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AXA2B-FD1 AXA2B-FD1
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 6/03/2025 REV. 6/03/2025
© COPYRIGHT 2025 METRA ELECTRONICS CORPORATION © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 6/03/2025 REV. 6/03/2025
© COPYRIGHT 2025 METRA ELECTRONICS CORPORATION © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
Connections & Installation
• Unplug the main harness from port “A” in the touchscreen display, then connect the
AXA2B-FD1 harness in between.
• Connect the AXA2B-FD1 harness to the AXA2B-FD1 interface.
• Connect the Gray (right) and White (left) RCA jacks to the front full range outputs from
the aftermarket radio.
• Connect the Blue/White wire from the AXA2B-FD1 harness to amp turn-on.
• Tape off and disregard the Blue/Red wire.
Testing
• Cycle the ignition on and test the installation for functionality.
Note: Fade control will be lost.
• Locate the amp gain between the two connectors. Adjust the gain as needed to bal-
ance the level between the woofers and tweeters.
• If the level isn’t the same from all speakers, follow the instructions below to correct
the issue.
• Cut the RCA jacks off to expose the speaker wires inside.
•
Connect the following wires to the front speaker outputs from the aftermarket radio
:
Connections & Installation
• Unplug the main harness from port “A” in the touchscreen display, then connect the
AXA2B-FD1 harness in between.
• Connect the AXA2B-FD1 harness to the AXA2B-FD1 interface.
• Connect the Gray (right) and White (left) RCA jacks to the front full range outputs from
the aftermarket radio.
• Connect the Blue/White wire from the AXA2B-FD1 harness to amp turn-on.
• Tape off and disregard the Blue/Red wire.
Testing
• Cycle the ignition on and test the installation for functionality.
Note: Fade control will be lost.
• Locate the amp gain between the two connectors. Adjust the gain as needed to bal-
ance the level between the woofers and tweeters.
• If the level isn’t the same from all speakers, follow the instructions below to correct
the issue.
• Cut the RCA jacks off to expose the speaker wires inside.
•
Connect the following wires to the front speaker outputs from the aftermarket radio
:
Connections & Installation
• Unplug the main harness from port “A” in the touchscreen display, then connect the
AXA2B-FD1 harness in between.
• Connect the AXA2B-FD1 harness to the AXA2B-FD1 interface.
• Connect the Gray (right) and White (left) RCA jacks to the front full range outputs from
the aftermarket radio.
• Connect the Blue/White wire from the AXA2B-FD1 harness to amp turn-on.
• Tape off and disregard the Blue/Red wire.
Testing
• Cycle the ignition on and test the installation for functionality.
Note: Fade control will be lost.
• Locate the amp gain between the two connectors. Adjust the gain as needed to bal-
ance the level between the woofers and tweeters.
• If the level isn’t the same from all speakers, follow the instructions below to correct
the issue.
• Cut the RCA jacks off to expose the speaker wires inside.
•
Connect the following wires to the front speaker outputs from the aftermarket radio
:
Connections & Installation
• Unplug the main harness from port “A” in the touchscreen display, then connect the
AXA2B-FD1 harness in between.
• Connect the AXA2B-FD1 harness to the AXA2B-FD1 interface.
• Connect the Gray (right) and White (left) RCA jacks to the front full range outputs from
the aftermarket radio.
• Connect the Blue/White wire from the AXA2B-FD1 harness to amp turn-on.
• Tape off and disregard the Blue/Red wire.
Testing
• Cycle the ignition on and test the installation for functionality.
Note: Fade control will be lost.
• Locate the amp gain between the two connectors. Adjust the gain as needed to bal-
ance the level between the woofers and tweeters.
• If the level isn’t the same from all speakers, follow the instructions below to correct
the issue.
• Cut the RCA jacks off to expose the speaker wires inside.
•
Connect the following wires to the front speaker outputs from the aftermarket radio
:
• Gray: Right +
• Gray/Black: Right -
• White: Left +
• White/Black: Left –
• Gray: Right +
• Gray/Black: Right -
• White: Left +
• White/Black: Left –
• Gray: Right +
• Gray/Black: Right -
• White: Left +
• White/Black: Left –
• Gray: Right +
• Gray/Black: Right -
• White: Left +
• White/Black: Left –
Bekijk gratis de handleiding van Axxess AXA2B-FD1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXA2B-FD1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 157 MB |
