Axxess AX-NISUSB-1 handleiding
Handleiding
Je bekijkt pagina 1 van 2
AX-NISUSB-1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 5/21/13
AX-NISUSB-1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 5/21/13
AX-NISUSB-1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 5/21/13
AX-NISUSB-1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 5/21/13
Introduction
The AX-NISUSB-1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AX-NISUSB-1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AX-NISUSB-1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Introduction
The AX-NISUSB-1 is used when you want to retain the OE USB port on select
Nissan vehicles (radio utilizes rear USB input). In addition we included RCA’s
to allow the user to retain their factory installed 3.5mm jack. (Aftermarket
radio must have Aux in)
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
Installation
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be
controlled from the audio device, not the aftermarket radio.
AX-NISUSB-1
USB adaptor for select Nissan vehicles
AX-NISUSB-1
USB adaptor for select Nissan vehicles
AX-NISUSB-1
USB adaptor for select Nissan vehicles
AX-NISUSB-1
USB adaptor for select Nissan vehicles
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
NISSAN
Cube 2011-2012
Juke 2011-2013
NV 2012
Versa 2011-2012
APPLICATIONSAPPLICATIONS
APPLICATIONS APPLICATIONS
Bekijk gratis de handleiding van Axxess AX-NISUSB-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AX-NISUSB-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 191 MB |
