Axxess AX-LOC2.2-LD handleiding
Handleiding
Je bekijkt pagina 5 van 8
5
QUICK REFERENCE: AX-LOC2.2-LD
REV. 8/21/23 INSTAX-LOC2.2-LD
AX-L0C2.2-LD
L LINE IN R R OUTPUT L
SPEAKER IN
AX-RM1
Remote - Dash mount bass knob AX-RM1
(sold Separately)
LINE IN - To use the AX-LOC2.2-LD as a line
driver, plug the low level outputs from your
source unit into the LINE IN RCA’s.
Ground Isolation - Three selections : 200
Ohm, ISO, GND. Refer to page 4 for addi-
tional information. Default setting: ISO
Turn on mode - Selectable three
position switch that will control
when the LOC turns on. Settings
are REM, DC, and Audio. Refer to
page 4 for additional information.
Load Select - Three selectable ohm load
options, 20k, 60, and 20. Adjust resistance
loads to keep OE equipment producing audio.
Refer to page 4 for additional information.
Power Indicator - When lit the
AX-LOC2.2-LD is on.
LEVEL - Adjusts the output level of the RCA’s
OUTPUT - Full Range level adjustment
Maximized - While adjusting the MAIN LEVEL
the Maximized LED may light up meaning a
clipped signal is detected. Reduce the MAIN
LEVEL adjustment until the LED is no longer lit.
Speaker Input - Speaker level input. Feed left
and right speaker wires from the head unit or
amplier to the respective terminals.
GND - Connect to chassis ground
+12 Volt - Connect to constant 12 volt
source.
REM In - Remote turn on input or true
Ignition, may dier if DC or Audio is select-
ed on the Turn on Mode switch.
REM Out - Remote turn on output. Depend-
ing on the Turn on Mode switches position
the AX-LOC2.2-LD will provide a remote
output signal. Refer to page 4 for additional
information.
3.5”
5.26”
Bekijk gratis de handleiding van Axxess AX-LOC2.2-LD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AX-LOC2.2-LD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 692 MB |
