Axxess AX-BXLOC2-PRO handleiding

Niet gecategoriseerd

Axxess

8 pagina's

PDF beschikbaar

Handleiding

SETTING UP BASS-X

Many automotive manufactures load predetermined crossover slopes into OE radios to protect the factory speakers. The louder the volume the more low frequencies are removed. This feature is

not ideal when wanting to upgrade your factory system with aftermarket amplifiers and speakers. The Bass-X Feature on the BXLOC Series restores those lost frequencies, improving the overall

listening experience with just a few simple adjustments.

1. Start by turning the Bass-X Gain to MIN and the Bass-X Threshold all the way down.

2. Turn the Bass-X Level Adjustment to the center position.

3. With the volume all the way down start playing music with a good vocal and bass track. During these next steps be sure to pay attention to how far you turn the volume up so you do not

damage your equipment.

4. Slowly turn the radio’s volume up until you hear the bass drop off. This could happen at any time. Once you believe you have found the point at which the bass drops off turn the volume

up and down until you are confident the bass is being affected, then stop.

Tip: Keep playing the same song at the same time stamp during this process.

5. Using a small screw driver, adjust the Bass Threshold Control up until the bass starts to come back.

6. The Bass Level Control on top of the LOC can be used to fine tune the low frequency output to the listening preference.

Note: If during Step 4 your bass does not roll off, but you still want more, turn the Bass-X Level Control fully down, rotate the Threshold Control fully clockwise to lock in the bass equalization.

Bekijk gratis de handleiding van Axxess AX-BXLOC2-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.