Axxess ANC-GMH1 handleiding
Handleiding
Je bekijkt pagina 8 van 14
AMP/ANC Location
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other
than the location mentioned below.
The ANC system operates when certain conditions are met:
• The amplifier passes self-diagnostic checks.
• All doors are closed.
• Battery voltage is between 9.5 V and 16 V.
• Cabin temperature is below 140°F (60°C).
• Engine speed is between 550 and 3000 RPM.
2018-2022 TRAVERSE / ACADIA
To bypass the ANC you would need to remove the
front right side (RPO UQA) or front left side (RPO
UQF) of the center console. Pop off center console
floor panel to gain access to the Amplifier/ANC
module under center dash forward. Simply unplug
the OE connector form the AMP/ANC module and
plug the t-harness inline. Your ANC’s have been
bypassed.
RPO Codes: UQA, UQF
Bekijk gratis de handleiding van Axxess ANC-GMH1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | ANC-GMH1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8028 MB |
