AVPro Edge MXNet AC-MXNET-1G-AVDM Handleiding (78 Pagina's)

Handleiding

Page 14 of 78

MXNET 1G USER MANUAL

3 PRODUCT OVERVIEW

3.1 Box Contents and Specifications

Refer to the Specifications page for these products located on the AVPro Edge Website for box

contents and technical specifications.

3.2 AC-MXNET-1G-E / AC-MXNET-1G-E-AVDM / AC-MXNET-1G-EV2

Encoder Front Panel

Encoder Rear Panel

1

POWER

STATUS

•

Blue LED status indicator light

• Slowly pulsates until startup is complete after a reboot, at which point the

light will turn solid blue

2

LINK STATUS

•

Green LED status indicator light

• Continuously flashes until an active source is connected to the HDMI IN port

on the encoder, or the source itself becomes active and is routed to a

decoder, at which point the light will turn solid green

3

EDID COPY

•

Press to copy the EDID of the sink device connected to the HDMI LOOP OUT

port on the back of the encoder

4

RS232

•

3-pin terminal block connector port

• Sends encapsulated/virtualized RS-232 (serial pass-through) over IP via the

MXNet API

• Supports serial routing with direct connection to a control system processor

5

I-PASS

•

3.5mm stereo jack (TRS) IR receiver port

• Sends IR signals via a direct connection from a control system processor to

the IR output of the desired endpoint(s)

6

IR-EYE

•

3.5mm stereo jack (TRS) IR receiver port

• Supports usage of an IR eye to capture IR signals from a control system

processor or third-party remote to send IR signals to the IR output of the

desired endpoint(s)

Bekijk gratis de handleiding van AVPro Edge MXNet AC-MXNET-1G-AVDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.